Aquaforest Stone Fix Cement Rock Glue

Stone Fix is a quick-setting cement-based glue for joining large pieces of live or ceramic rock in aquascapes. According to the maker it contains no compounds toxic to fish and invertebrates. It contains Portland cement; the chromium (VI) content does not exceed 2 ppm before the expiry date.

Mix 50 ml (3 tablespoons) of water per 100 g (half a cup) of Stone Fix: add the powder to the water in small amounts and stir until the mass is smooth, then start gluing at once. Glue outside the tank where possible; if you have to glue under water, switch off the circulation pumps. Leave the joined pieces for 15 minutes to bond. A temporary haze in the water is harmless. Because the pH can rise, glue no more than 2–3 pieces a day in a tank with livestock.

• Store dry and cool in the original pack, use within 12 months of the production date
• Bag 1.5 kg; also 250 g

Safety information (CLP)

Signal word: Danger

Pictograms: Corrosion (GHS05), Exclamation mark (GHS07)

H315 Causes skin irritation.

H318 Causes serious eye damage.

H335 May cause respiratory irritation.

Precautionary statements:

P102 Keep out of reach of children.

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352 IF ON SKIN: Wash with plenty of water/…

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call a POISON CENTER/doctor/…

P313 Get medical advice/attention.

Full details: manufacturer's safety data sheet (SDS), available on request.